Saturday, in the C&W yard.
Cold and dry, a good day for hard work. There were 11 of us, quite a good turnout too.
The job was to resleeper a turnout in the C&W yard. Most of the gang set off to do this, while two of us took throughbolt chairs to the 2807 site at Toddington in the Transit, with the intention of using the return trip to recover some useable sleepers and chairs for the yard job.
David and Yours Truly unloaded the throughbolt chairs, and can be seen here loading the now empty Transit with a pack of 12 sleepers, and a handful of AS1 chairs around them, always mindful of the maximum weight this vehicle can take.
Nearby, in the greenhouse, we were delighted to see that the three posts for the Broadway P2 canopy have returned from the galvanisers.
They now need a coat of paint, before they can be erected at Broadway.
Also nearby, in the car park, we found this set of wheels, recently fitted with its SKF axle boxes.
This looks like the set for the tender of 76077, a happy development, next to the expensive repair of the boiler.
We made a donation !
We took the 12 sleepers and 8 chairs back to the work site at Winchcombe.
Here the rest of the gang had made an excellent start on resleepering that C&W turnout.
The sleepers we found there were ancient, as were the chairs used back in the 1980s. Many were Midland 4 bolters, which we will pass on to 2807.
The southern end had a wreath on it, in honour of PWay stalwart from the very first day, John Lees. More about John further down.
We joined the gang, moving new (recycled) sleepers in. There was too much movement in the gauge, as the Midland 4 bolters only had two bolts in them, and the underlying sleepers were failing.
Here's that replacement sleeper going in, with better AS1 chairs.
Once the replacement sleeper was in, we drilled it and bolted it down.
We did 6 sleepers like that during the day. More are needed, as we near the widest end of the turnout.
One of the replacement chairs had casting markings on them that we hadn't seen before - BR (E-G).
What do readers think these stand for?
We did a quick visit to the box at Winchcombe, to gain further detail on the tray for their stove. We are commissioning a copy of this one, for Broadway box, which will have the Romesse stove from Notgrove box.
The actual stove at Winchcombe is not good in service (the glass keeps breaking, and it's not a railway one) and we were pleased to hear that another Romesse stove has been sourced to replace it.
At the end of our day we had our usual 3.55pm tea in the Coffeepot. Just before it closes ! There we saw the wreath for John Lees, very touching. Driving the DMU was one of his favourite volunteering activities.Three pots of tea had been reserved for us. It wasn't enough. We seem to consume a lot of the stuff.
At the end of our day we watched 3850 bring in its last train, with the Bubble Car alongside. It's lovely how busy the station gets, when the trains cross here.
Monday at Broadway
Very windy, but bright. Neal and John worked on the building, while Yours Truly started sorting out the corrugated iron sheets destined for the platelayer's hut.
These sheets have been left lying outdoors for about 8 years now. Water has crept in between them, and stayed there, so they have rusted in the middle.
They were bought by our builder for the P1 roof, but only half the thickness specified, and also not powder coated, as asked to do.
This is the result (not only rust, but a lot of money wasted).
But at least we can use some of them on a small project, where the thickness is not critical.
We sorted out 6 of them, and stacked these, and the remainder, with bearers in between, and on a slope, to make sure no water gathered in the middle.
The second job on Monday was to start refurbishing the better ones. We have done one sheet - a slow job.
Neal and John worked on the store room end of the building. It's looking pretty good by now, don't you think?
John was able to complete the delicate brickwork around this window. He's using the additional specials, which have proved to be a success. After pointing it's hard to see any difference.
After running out of etch primer we joined the team on the building, and did some painting.
These are the fill in arches, which marry the square window frames with the semi circular brick arches above them.
Neal made these, and we gave them a coat of primer on Monday.
Having built up around the first window on the end, John was able to complete the corner on Monday, at least as far as the first level of corbelling.
Wednesday with the Usketeers.
Three of us today, Dave being on a mission.
Before adding the last 4 sleepers on each side Paul needed to lengthen the supporting 2x4 by patching in an extension. We're using second hand wood here, that Dave's neighbour put in a skip. We don't have a budget at all for this job! So purchase costs need to stay low.
At the moment we're putting in little personal bits of money, eg 5L of bitumen paint purchased on the way home today.
Today, being half term, we had the purple timetable, with two steamers. Here is 2807, with driver Mark cheering us on.
Paul cut an extension piece to length, and he then got Julian to trim the end with a chisel to make a joint.
Then it was back to fitting sleepers (D, C, B and A, and on the other side, 4,3,2 and 1.)
Jules drilled the bolt holes through the top.
The other steamer was 3850. This is a great spot for videos, because the locos are hacking away at the grade to get into the tunnel, and the summit by the Royal Oak. Unfortunately the extra Blogger camera seems to be slow in taking a picture once given the command, so these two both have their front ends cut off. Grrrrr....
Sadly the trains were not well filled today, and the Broadway cafe also reported a slow day. Hope this is not indicative of the coming season.
Here both sides are now complete. To keep them apart, we need to insert a roof joist.
Now it turns out that the concrete floor is not level, but we can sort that OK.
This picture is to show you the sides, as completed today.
We've got 5 more sleepers to put up at this end, leaving a gap of 3 for the door.
Have you noticed the page view counter, which is still going up? A month ago we had 15.000 views in a month, and now it's 81.000, and rising. Bizarre!
A look over the fence - Dean Forest Railway.
Neal, Greg and Yours Truly, three heritage minded individuals, decided on a day out at The Dean Forest railway a week ago. The GWSR and the DFR have something in common - a Hawksworth inspection saloon. What was theirs like, how did they use it?
Theirs is 80943, and ours is 80975. Seven were built in 1948, and all seven currently survive.
The DFR saloon is in regular service, and you can travel in it by buying a first class ticket, or paying a £6 supplement at the door. It seats up to 23.
Those seats are basically occasional chairs and sofas, beautifully re-upholstered. That had to be done in situ, as the items are too large to pass through any doors. There is an open saloon at each end, and the seats by the big windows on the ends are quickly taken.
Unfortunately you are not allowed to play with the brake....
In the centre section there is a guards compartment, with retractable steps, flanked by a toilet and a small kitchen.
The kitchen was largely original, and had a very chunky gas hob. A large rail at the front made sure that dishes didn't fly off when the train went over rough track. In the roof was a large brass extractor fan, and despite post war austerity a beautiful electric ceiling light was fitted.
The toilet on the other hand was non-functional. It was bare, and in use as a broom cupboard.
The saloon was manned by its own guard, who gave us a brief low-down as to where we were going, and what we could/couldn't do. (like lower the steps, as that put the vehicle out of gauge)
We trundled down to Lydney with the pannier tank.
With the loco at the front, the ride back uphill became rather bouncier. We thought it was the suspension, but no - on the way back downhill, with the saloon trailing behind, it was perfectly smooth.
At Lydney, we found the remains of St Mary's footbridge, which had been demolished by a digger being pulled along by a works train. All the pieces were neatly laid out. It was surprising how many pieces were cast iron, including all the risers of the steps, most being now broken. The latticework parapets were twisted, and the cast iron supports broken in two.
Departure of the first train of the day at Norchard was from the lower, terminal platform, but once up and running, the trains ran along the high level.
That gave some good photo opportunities, such as this departure from Norchard, with the inspection saloon in full view.
Notice the orange coloured enamel sign; we will come back to that.
![]() |
| Saturday 8th March 2003, at CRC with Raveningham Hall, and the PWay gang in civvies. |
![]() |
| 9th June 2001 - loading ballast at Bishiops Cleeve |
| John as driver of the DMU, with Dave Davey. |
| A quiet moment on the Broadway extension. |
| Exchanging phone numbers at Laverton. |
| With the extension gang at Peasebrook - almost there. |
| On a cold day during the Winchcombe relay in the winter. |
![]() |
| That umbrella often came in handy. |
![]() |
| We got there! The PWay relaying train arrives at Broadway on 23 12 2017. (Nigel Black) |











The posts for P2 at Broadway look nice, but refresh my memory, were not the posts on P1 adorned with weld embelishments on their surfaces?
ReplyDeleteThe chair that has the markings BR (E-G) could be British Raliways Eastern region anf the 'G' may stand for a depot such as 'Grantham' or other such. Certainly a depot on the LNER somewhere.
The stove in the box at Winchcombe looks very nice. Maybe their stove's glass keeps breaking due to it not being heat proof glass?
If you fit the 'Notgrove' stove with such, (tell the glazier what you want it for), it should be alright.
In mentioning the corrigated sheets not being to the required spec. i.e. thicker and powder coated - and they were not. Could the builder have been forced to get the correct ones and pay for the eroneous ones from his own pocket?
John's work on the storeroom end of the P2 buiding at Broadway is truly artistis and very nice too. Neal's work on the top wooden formers is no less artistic and will grand when fitted.
The P. Way hut is looking so much better this week. Last week it looked a bit short in length, but now it is at its full length it looks a lot more as it should. We can now see the end game!
All the inspection saloons that are fully restored ar wonderful to see the inside of. I looked through the one at the SVR prior to it being refutted.
i also got to see the ind=eide of the LNWR 6 wheeled saloon when it was there at Highley for some while. that was even more grandiose, but on a slightly smaller scale. I believe it may now on the Foxfield Railway.
Sorry to hear of another of your ex workmates passing. I know what all this is about having just lost my partner pf 21 years. It seems like they have just gone away for a while, bu thet=y haven't, it;s perminent!
Regards, Paul.
- They have the same embellishments welded on.
Delete- The Romesse stoves don't have glass, they're egg shaped, solid cast iron. The current Winchcombe one is a domestic type.
- The builder was protected by the then chairman. Both have since passed away.
- My best man, of long ago, lost his wife last year, but has found someone else. There is hope !
So there are two errors in the enamel sign - what/where? I checked carefully, but couldn't see anything different between the two copies!
ReplyDeleteIs it worth doing anything to try and better store the remaining corrugated iron sheets, or are they now so damaged that letting them rust away is really the only reasonable thing to do with them?
- You can't see the difference between the enamel original and the AI copy, because the AI mistakes are where there were big rust holes. It had to guess. However, on line (on a Flickr page) there is another almost identical sign, and I was able to see what AI guessed wrong. If you don't have that other photograph, the AI version (which I had printed off to double Royal) looks OK.
DeleteThe remaining corrugated iron sheets don't seem to have an owner, but I re-stacked them into a better pile, with bearerers in between, and on a slight slope.
Decent corrugated iron sheets are 1.2mm, but as of a couple of years ago this no longer seems to be available in the UK. We bought from the last stock for P2, had it powder coated, and it's currently in store, waiting to be used.
Current corrugated iron seems to be 0.7mm thick, nearly half of the original.
Thanks; very informative!
DeleteThere is a version (based on the original?) of the sign available to buy here: https://www.redbubble.com/i/poster/RAILWAY-PASSENGERS-ASSURANCE-CO-ADVERT-by-ThrowbackAds/58281545/flk2 that might be of interest:
DeleteI can see two differences between the poster at the link and Alex's version - Fidelity Guarantee and the sword of the horserider.
Thanks, I hadn't seen that one. You are right about the two differences. There is also something going on with the dragon, not clear what. AI guessed - it's good from 10 paces :-)
DeleteTo get an exact picture of the dragon, takre a look at a half soverein coin. It is the same.
DeleteA picture, maybe off ebay, and blown up will give you all the detail.
Regards, Paul.
Blog readers can find the RAIB's Safety Digest into how the St. Mary's footbridge met it's demise from the webpage here:
ReplyDeletehttps://www.gov.uk/government/publications/safety-digest-052025-dean-forest-railway
Thank you for the photos and the passage from the eulogy of the late John Lees. I was a member of the track gang around 1981 and I remember John well. He was, as they say, a really nice chap, and we both had an interest in aviation, both of us having private pilots' licences at that time. Living away from the GWSR for so many years, I hadn't seen John for many years. Nonetheless, I have pleasant memories of our time on the track gang in those pioneering days, and I am so glad that John was able to witness the reopening of the line to Broadway. A kind, patient man whom I was lucky to have known.
ReplyDelete