Eastbank....
.... was the name of the stationmaster's house in Broadway when it first set up as a B&B in 1979. We had a nice email - we always appreciate emails with a bit of history, especially if there are old pictures attached - as a result of the last blog, which featured a picture of Pannier 8491 at Chalford. This prompted Neil Evans to send us a bit of history of the stationmaster's house, after the station closed.
By way of background we give below a picture during the time the first new people, the Eaketts family, owned it, having bought it off a property company in the 1960s after the station closed to passengers.
 |
Trackside view of the former station site in the 1970s, with the new brick wall and the Eaketts' Wolseley parked below the house
|
From the Tony Harden collection.
 |
Station forecourt, showing the new brick wall for the lower car parking area of the stationmaster's house
|
From the Tony Harden collection.
 |
Stationmaster's house from the rear in the 1970s
|
Copyright: Lorna Eaketts.
 |
Stationmaster's house, Christmas 1979. A sectional concrete garage has now appeared on the left.
|
Copyright: Neil Evans.
Neil explains:
My brother and his wife purchased the Station Master's house at Broadway
(then called "Eastbank") in the late 1970's and for many years ran it
as a B&B. I remember that not long
after he bought it, the GWSR had started re-building the railway at
Toddington and I asked him if he was looking forward to the railway and
station being reinstated at Broadway; he replied "nothing will ever be
built
at the bottom of my drive". Sadly, he is no longer alive, but I wonder
what he would make of the fantastic heritage development the GWSR has
now created at Broadway?
With respect to the Broadway stationmaster’s house, my
brother purchased the property in, I believe, 1979 and whilst I was
working away in the middle east. Consequently, I never had the
opportunity to meet
the previous owners (Mr & Mrs Eaketts) and indeed, I never heard my
brother mention that particular name. My brother and his wife significantly
extended the house in the early 1980’s and ran a B&B business from
there until they moved away in the early 2000’s. Over Christmas 1979,
I stayed with them whilst on leave and took the photo of the
house from the Platform 2 side of the GWSR trackbed. You can see this
photo shows the empty trackbed, the original concrete and wire fence
between the GWSR
trackbed and their property (later replaced by the current leylandii
hedge) and the original sectional concrete garage halfway up the drive.
This was later replaced by an underground garage closer to the side of
the house.
Unfortunately, I don’t think I have any further information about the
house that would be of interest to your members.
I was most interested to read your latest posting and in particular to see the pictures of Hawksworth pannier 8491.
When I retired in 2015, I
decided to treat myself to a 5" gauge steam locomotive and bought a
pre-machined kit for ...... a Hawksworth pannier tank. Completed in 2016
and painted
black, it now has cab and smokebox number plates as 8491, with an 85B
shed code. So, in a manner of speaking, pannier 8491still exists!! See
attached photos.
Regarding the picture of 4161 heading the Oxford
University
Railway Society tour at Gloucester Central, this engine was a regular
engine on the Hereford to Gloucester services. This line, with its
tunnels, spectacular bridges over the River Wye and picturesque wayside
stations was
my favourite cross country route at the time, but sadly little now
remains to show its existence. Returning to 4161, I was fortunate that
on 7th August 1964 the Hereford driver of this engine agreed to give me a
cab ride between
Grange Court Junction and Ross on Wye - a memorable experience,
especially the passage of the 771 yard long Lea Line Tunnel!
Best wishes,
Neil Evans
Derek's 1963 colour railway photographs
This week we're going to Derbyshire, with an exciting visit to a steeply graded railway line - the Cromford & High Peak Railway. Derek's got quite a story about it. He says:
During a day's shed bashing trip to Derbyshire in the second half of the 1950s with the local railway enthusiasts from Oxford, the organiser asked the coach driver to stop on the
A6 at a point which seemed to be of no particular interest. He then got out and walked back a bit and gazed over the parapet of a bridge, got back on the coach and told us what he had been looking at. It being a main road
with nowhere to leave the coach and the fact that we had an itinerary to keep, we had to be content with him telling us what he had been so interested in seeing. Intrigued, I subsequently bought a book describing the Cromford
and High Peak Railway. It took me until the summer of 1963 to getting round to visiting the area and taking a week's holiday to explore the railway for myself. I took the train from Oxford to Matlock with my bike, and
then cycled to my base for the week, bed, breakfast and evening meal at a cottage in Monyash.
The Cromford and High Peak Railway ran from the Cromford Wharf of the Cromford Canal to the Peak Forest Canal at Whaley Bridge. The idea being to provide access to Stockport and Manchester
for industrial and agricultural products from the Midlands. In the 1820s when the plans for the route were drawn up the thinking was still towards it being a canal. The contours posed a considerable challenge with the route.
The Cromford end was 277ft above sea level and the other end 33 miles away at Whaley Bridge was 517ft above sea level. Not too bad until you take into accounts the fact that at the highest point it was 1264ft above sea level,
so many flights of locks would be required. Providing an adequate water supply was going to be a problem. It was not surprising then, with railways coming into play in other parts of the country at this time, it was decided
to build it as a railway instead. However, the design of the route did have the same characteristics as a canal, with inclined planes, nine in all until a couple where amalgamated later on, and a tortuous route with many sharp
bends. Work started in 1825 and the eastern half from Cromford was opened in 1830 with the rest of the line opening a year later.
The gradient of the different inclined planes was between 1 in 7.5 and 1 in 14. All but the latter were double track and worked by steel cable, or when first constructed, by chain. At
the top of each incline there was a winding house with a winding engine driven by a stationary steam boiler. Although one 'engine' at the incline at Whaley Bridge was a horse and a capstan. The idea was that, as far
as possible, compensating loads would be going up and down at the same time. When first constructed the line was operated with horses but steam locomotives began to take over from 1833.
The line had many sidings serving quarries and limestone works, with the transport of goods associated with that. For a while there was also a passenger service, with a 'fly'
coach attached to a train. The journey from end to end took five and a half hours and the passengers had to walk up and down the inclines.
The line also provided a means of supplying coal and water to the inhabitants and industry along the line and of course, not least for supplies to run the railway itself.
In the latter half of the nineteenth century the LNWR took over a central portion of the line, straightening it out and easing the gradients, and doubling the track, it then forming
part of the line from Ashbourne to Buxton. With this development, parts of the northwestern end of the line were abandoned, there being an alternative route to Whaley Bridge and Stockport.
Looking at the Sheep Pasture incline at Cromford as an example, this was 1 in 9 and 1 in 8 and 1320 yards long. The descending loads were limited to a total of thirtyeight tons. The load
would be prepared at the top of the incline and a couple of hefty pivoted blocks of wood would be swivelled under the wagon wheels to prevent accidental runaway. The trailing wagon would be attached to the steel cable with
twin lengths of chain which would be 'plaited' round the cable with deft repeated flicks of the wrists, and finally two or three leather straps would be tightened round the ends of the chain. Signalling to the bottom
end of the incline would be done by a series of bells and pointers. Once ready to descend, the pivoted blocks would be knocked away from under the wheels. There was a catchpit near the bottom of the incline where, if the points
were not directed to the line around it, the wagons would end up in the pit, albeit completely wrecked. There was a pointsman in a cabin alongside here and he would be alerted to the speed of descent of the wagons by a gong
which would sound repeatedly as the wagons passed triggers on the descent. The pointsman could judge if there was a runaway by the frequency of the gong sounding. There was an occasion when this catchpit served its purpose
with not much left to recover from the wreckage.
There wasn't always a catchpit. There had been at least one runaway before this was installed. The wagons involved took flight at the bottom, clearing the canal and the mainline
and ending up in the field beyond. Even after the catchpit was installed there was a runaway after the wagons had successfully passed it, with not quite so dramatic consequences.
My visit took me to those parts of the line that were still operational and also a look at some of the abandoned parts as well.
Here is a series of pictures all taken at Sheep Pasture incline. The first picture shows a run of two wagons just sent on their way with the chain plaited round the steel cable. The
massive blocks of wood used to keep the wagons in place prior to departure can be seen in the foreground.
Then another wagon is sent on its way down.
Next is a wagon just about to reach the top.
Then (LH picture) near the bottom of
the incline looking up, a run is ascending past the catchpit. Viewed
from this angle the catchpit does not seem much but the business side is a
bit buried.
This is followed by a
run coming down passing the catchpit (RH picture). The pointsman's cabin is alongside
the points where the line diverges.
The previous two views
were taken from the bridge which carries the A6 over the incline.
Derek also sent three more current pictures taken in 2002
This one shows the catch pit near the bottom of the incline, with the A6 road bridge in the background, from which the pictures looking up in 1963 were taken. The little square hut features in both the old and the more recent pictures
A shot of the tunnel at the bottom, which is actually the A6 road bridge.
This picture was taken from the incline side of the road bridge, looking down to the foot
of the incline on the other side of the bridge. If you zoom in on the
picture you can see the rails that are in the picture featured above
that one.
.
Now back to 1963:
This
view is looking the other way down the incline from the bridge. This is
the bottom of the
incline with the line then curving away to the wharf.
Back at the top of
Sheep Pasture incline 0-4-0ST 47007 is in the sidings. The line on the
left leads to the incline. The top of the winding house can be seen
behind the loco.
Loco 47007 looks a bit like an Austerity from the front, but was actually an 0-4-0 LMS design built at Horwich in 1953
for BR
. It floated round Birkenhead and Derby for a few years, before finishing its short 10 year career at Rowsley shed. It was withdrawn at the end of 1963, a few months after Derek's visit.
Middleton incline is
the next incline along the line. This is 800 yards long with a gradient
of 1 in 8.25. I didn't see any activity on the occasion of my visit but
it was still
in regular use then.
I believe the winding
house and engine is now kept as a monument and is next to the start of a
cycle trail along part of the former railway.
A bit further along the line is Hopton Tunnel.
Continuing west is
Longcliffe. I mentioned the use of the line to supply water. Here are
two ex LNWR tenders in use for that purpose with another unrecorded
0-4-0ST at the head.
Further reading: The Cromford & High Peak Railway by Alan Rimmer. Locomotion Papers Number Ten published by the Oakwood Press 1956.
Further viewing: https://www.youtube.com/watch?v=UiCyDXG50qw&t=588s
Bratton Fleming station / Exmoor Associates Ltd
Bratton Fleming station is now in secure L&B friendly hands, and the tenant is in, and loves it there. Now it's generating an income too. As soon as there is better weather, and regulations allow it, they plan to hold an open day there. The site is very restricted and you can't park anywhere, so people may need to park in the village and walk down, much as passengers were once expected to do.
Exmoor Associates Ltd is a bunch of guys who clubbed together to buy, patiently, parts of the old trackbed for eventual reinstatement of the line as / when they come up for sale. So you might get many months without news, and then suddenly there is a burst of activity. And here comes an example of the latter!
 |
Part of the trackbed that has become available to buy.
|
Quite a stretch of the trackbed (once chopped up into 100 or so bits in the 1930s) has just become available, but the little company exhausted itself on the purchase of Bratton Fleming station. They raised about 70% of the cost from new public contributions, but still had to cover the last 30% from the remaining resources of the company. Now the war chest is empty. And then, just as the first tenant moved in, another opportunity has arisen. Like the No.9 bus, you wait ages, then three come at once.
They don't want to say exactly what and where, as conveyancing is very slow at the moment and they don't want the deal to be snapped from them, but we can say that it is above Bratton Fleming, somewhere between there and the reservoir at Whistlandpound. They don't want it sold to someone else as a future ransom strip, so negotiations are always very delicate.
Here is the relevant extract from their newsletter, which shareholders receive whenever there is something exciting to say:
Another Opportunity for More Trackbed
After just recovering from the frantic efforts in purchasing Bratton Fleming Station and having a feeling of calm at last, we then had a phone call from a local land agent with whom we
have dealt before, offering a considerable length of trackbed not that far from Bratton Station.
Having invested a considerable amount of money in the purchase of Bratton Station our bank balance is sadly now depleted, and coming so close to this massive expenditure we just haven’t
had the time to replace those funds.
So we return to you for help once again; needless to say we don’t want to lose this vital section, and once again we are selling Exmoor Associates shares. We can go a long time
with nothing being available then all of a sudden several sections become available at once.
Exmoor Associates will use all the platforms available to get the appeal out to the widest newest audience as possible.
The Directors realise that everyone’s financial position is different as far as supporting us, so we have tried to put in place something to suit all.
Shares continue to be issued as usual in blocks of £100 but we are equally happy to accept £10, £20 etc. a month until £100 pounds is raised for a registered shareholding.
See below for details.
These are very exciting times for Exmoor Associates but realise if our endeavours are to be achieved in the long-term we will need to have fresh ideas to tackle some of the more difficult
sections of the former Lynton and Barnstaple Railway in the southern part.
We will be shortly announcing one of those ideas and you will be first to hear.
Finally thank you in anticipation of your help with this. It is not ideal timing we know but out of our control.
A Go Fund Me page will not be used this time, as a precentage is deducted from donations, and there is a potential tax issue for the company. Share purchases are the simplest way at the moment.
So this is what you need to do, if you want to help buy the stretch of trackbed:
For existing share holders to purchase additional shares all that is needed is to make a BACS payment using the details below.
Exmoor Associates Ltd.
Sort Code: 30-93-08
Account No. 01550790
To set up a standing order use these details or send a cheque to the address below.
The Company Secretary
Exmoor Associates Ltd.
Edgemoor, Moorland Close
YELVERTON PL20 6DD
New shareholders should get in touch with the Company Secretary in order to receive a copy of the Shareholders’ Agreement, consent form, and data protection
and privacy policy. By post or email to tony @ exmoor-associates.co.uk (remove the 2 blanks)
Yours truly has answered the call with another bunch of shares. Once you are a shareholder, buying more is easy - just make a bank transfer. If you want to help save this piece of trackbed, then perhaps you'd like to do the same?
See you next time!
